GRAIN Wood conveyor is modular conveyor. The carrier built sections of our large catalog. The sections are available in different lengths and bends with different degrees.
The sections are made of galvanized sheet metal. The bottom plate is 3 mm, side plates is 2 mm, and the top plate is 2 mm.
In the middle of the bottom plate is mounted a strong chain rail made of antistatic PEHD 1000 on which the chain runs. This ensures quiet operation and a long service life.
Chain is a strong chain conveyor with a pitch of 100 mm and has a tensile strength of 80 KN.
GRAIN Wood conveyor is primarily used for transport of wood chips, pellets, etc.
- High capacity - Up to 80 m3/h on 2,2 kW gearmotor..
- A tenth energy pitted against traditional air/duct transport.
- Transport in all degrees up to vertical.
- Up to 15 meters free span
- Reliable. The slow-moving chain, means very little wear
- Fireproof. The slow-moving chain creates no sparks
- Quiet. The slow-moving chain means almost silent transport
Minimum maintenance. All components have been carefully selected to ensure extremely long lifetime
Normally technical staff can maintain the system.
We can install without downtime.
The conveyor is assembled with a very strong Lap, which makes it is possible to build the conveyor together as you want it.
Standard sections are supplied in the following sizes. 490, 990.1390, 1990 and 2900 mm.
In addition, there is provided bends of 15o and 45o. In this way, ther can be made bends of 15o, 30o, 45o, 60o 75o and 90o.
The conveyor is ATEX approved inside for Zone 21, and it comes with Stiff explosion vents. The GrainWood conveyor is also available with ATEX approved gearmotor and electrical contacts, so that it can be installed in a Atex zone.
Click here to download the sections(Opens as PDF)